3
It is crucial that the authorized person/user of this equipment
read and understand these instructions. In addition, federal
law requires employers to ensure that all users are trained in
the proper installation, use, inspection, and maintenance of
fall protection equipment. Fall protection training should be
an integral part of a comprehensive safety program.
Proper use of fall arrest systems can save lives and reduce
the potential of serious injuries from a fall. The user must
be aware that forces experienced during the arrest of a fall
or prolonged suspension may cause bodily injury. Consult
a physician if there is any question about the user’s ability
to use this product. Pregnant women and minor children
must not use this product.
Fall Protection Systems
VERTICAL LAddER CLIMBING
SySTEM KITS
Thank you for your purchase of Honeywell Miller fall protection
equipment manufactured by Honeywell Industrial Safety.
INSTRUCTIONS FOR USE
EN
1.0 Purpose
The innovative GlideLoc®
Vertical Height Access Ladder
System Kit is designed to be permanently installed
to existing vertical fixed ladders to provide superior
worker maneuverability and fall protection in ladder
climbing applications. It is ideal for wind power/turbines,
telecommunications, utilities, industrial facilities, drilling rigs/
platforms, shipbuilding, crane installation and confined space.
The GlideLoc System meets local standards requirements.
2.0 General Requirements,
Warnings and Limitations
2.1 General Fall Protection Warnings
All warnings and instructions shall be provided to authorized
persons/users. Warnings and instructions must be read
and understood prior to using this equipment.
All authorized persons/users must reference the
regulations governing occupational safety, as well as
applicable standards (i.e, ANSI or CSA).
Proper precautions should always be taken to remove any
obstructions, debris, material, or other recognized hazards
from the work area that could cause injuries or interfere with
the operation of the system.
All equipment must be inspected before each use according
to the manufacturer’s instructions.
All equipment should be inspected by a qualified person on
a regular basis.
To minimize the potential for accidental disengagement, a
competent person must ensure system compatibility.
Equipment must not be altered in any way. Repairs must be
performed only by the equipment manufacturer, or persons
or entities authorized, in writing, by the manufacturer.
Any product exhibiting deformities, unusual wear, or
deterioration must be immediately discarded.
Do not use if the unit or any part of the system appears to
be damaged.
Any equipment subject to a fall must be removed from
service. (Refer to 9.0 Inspection and Maintenance.)
The user shall have a rescue plan and the means at hand to
implement it when using this equipment.
Never use fall protection equipment for purposes other than
those for which it was designed. Fall protection equipment
should never be used for towing or hoisting.
Never remove product labels, which include important
warnings and information for the authorized person/user.
2.2 System Warnings and Limitations
System Compatibility
GlideLoc Kits are designed for use with Honeywell-approved
components only. Substitution or replacement with non-
approved component combinations, sub-systems, or both,
may affect or interfere with the safe function of each other and
endanger the compatibility within the system. This incompatibility
may affect the reliability and safety of the total system.
GlideLoc Kits must be used in conjunction with the Body
Control I GlideLoc Fall Arrester with auto-locking carabiner,
Comfort GlideLoc Fall Arrester with auto-locking carabiner,
Comfort
2
GlideLoc Fall Arrester with auto-locking carabiner,
or the Universal II GlideLoc Fall Arrester with auto-locking
carabiner and a Miller full-body harness equipped with a
front attachment point designated for ladder climbing.
[NOTE: All instructions and warnings provided with the
fall arrester and harness must be read and understood
before using the equipment.]
System Capacity
The GlideLoc System can sustain multiple users so long
as the load-bearing capacities of the base structure, ladder
and ladder attachment are adequate. One (1) person per
guide rail section is permitted.
The distance between
users must not be less than 7 ft. (2.1m) to ensure that, in
the event of a fall, the person falling will not strike a user
below. The maximum number of workers allowed by ANSI
A14.3 is four (4) per system.
Fall Clearance
Ensure that adequate clearance exists in the fall path to avoid
striking a lower level, some other object, or another user.
Fall Arrester Capacity
Fall arresters are designed for use by one person only.
Maximum capacity is 310 lb. (140.6kg).
DO NOT EXCEED
THIS WEIGHT.
WARNING
All persons using this equipment must read,
understand and follow all instructions. Failure to
do so may result in serious injury or death. Do not
use this equipment unless you are properly trained.
