Honeywell HRGX161, User Manual

Page: 43 / 150

Viewing Live Video | 43
800-16694 - A - 04/2014
Operations in Live View
Switching Between Channels
In full screen display mode, you can switch between channels manually or you can use the
auto-switch function to automatically cycle through each channel’s video feed at predetermined
intervals.
Note Before you can use the auto-switch function, you must set the dwell time.
See
Configuring General Display Settings, page 39 .
To manually switch to the next channel, do one of the following:
• Scroll down with your mouse. (Scrolling up switches to the previous channel.)
• Right-click anywhere on the screen to display the shortcut menu, and then click Next
Screen .
To automatically cycle through the channels:
• Right-click anywhere on the screen to display the shortcut menu, and then click Start
Auto-switch .
The DVR starts automatically cycling through each channel. The period of time each
channel’s video feed appears on the screen is determined by the dwell time you specified
in the Display Settings.
To stop cycling through all the channels:
• Right-click anywhere on the screen to display the shortcut menu, and then click Stop
Auto-switch .
Main/Aux Output Switching
You can access certain live view mode features using an auxiliary monitor. These features
include
Single Screen , Multi-screen , Previous Screen , Next Screen , and Quick Set
(see Shortcut Menu, page 36 ).
When HDMI/VGA output is configured as the main output, you can switch to Main BNC output
by double-clicking the mouse wheel anywhere on the screen. The message "Double-click the
mouse again to switch the auxiliary and main output?" appears. Double-click the mouse wheel
again to continue, or click
Cancel to cancel the operation.
To switch back to the main HDMI/VGA output, right-click on the screen in live view mode to
display the shortcut menu, and then click
Main Monitor .