Honeywell HRGX161 User Manual Download Page 103

Page: 103 / 150

Configuring Network Settings | 103

800-16694 - A - 04/2014

Configuring Advanced Network Settings

This section describes how to configure PPPoE, DDNS, NTP, SNMP, UPnP, Multicast, RTSP,
server port, and HTTP port settings.

Note

Instructions for configuring email and remote alarm host settings are found in

Chapter 8, Configuring Alarm Settings

Configuring PPPoE Settings

The HRGX supports Point-to-Point Protocol over Ethernet (PPPoE) network connections.

To configure PPPoE settings:

1. Go to

Menu > Settings > Network > PPPOE

2. Select the

Enable PPPOE

check box to enable a PPPoE network connection.

3. In the

User Name

and

Password

fields, enter the user name and password assigned by

your Internet service provider for PPPoE access.

4. Click

Apply

to save your settings, and then restart the DVR for the change to take effect.

The PPPoE connection will initiate automatically.
To view PPPoE connection information, go to

Menu > Maintenance > System Info >

Network

Summary of Contents for HRGX161























































































































































Search results

Summary of Contents for HRGX161

Reviews:

Related manuals for HRGX161

Brands by name

Popular brands

Honeywell HRGX161, User Manual

Search results

Summary of Contents for HRGX161

Reviews:

Related manuals for HRGX161

Brands by name

Popular brands