Honeywell HRGX161 User Manual Download

Page: 68 / 150

www.honeywell.com/security

68 | HRGX DVR User Manual

Searching and Playing Back Video by Channel

You can play back video recorded on a specific channel. Channel switch is supported.

To play back the last five minutes of video:

1. Click a channel in live view mode to display the quick setting toolbar.
2. On the toolbar, click the

Instant Playback

button

. The channel begins playing back

video from the last five minutes.
You can use the on-screen playback controls to move backwards or forwards through the
video or to pause playback.

3. To return to live view mode, click the

Exit

button

To search and play back video from the current day or other dates:

1. Right-click a channel in live view mode to display the shortcut menu, and then click

Today’s Video

. The playback interface appears.

Summary of Contents for HRGX161























































































































































Search results

Summary of Contents for HRGX161

Reviews:

Related manuals for HRGX161

Brands by name

Popular brands

Honeywell HRGX161, User Manual

Search results

Summary of Contents for HRGX161

Reviews:

Related manuals for HRGX161

Brands by name

Popular brands