Honeywell HRGX161 User Manual Download

Page: 36 / 150

www.honeywell.com/security

36 | HRGX DVR User Manual

Shortcut Menu

The following menu appears when you right-click on the screen in live view mode:

Name

Description

Enter the main menu.

Single Screen

Switch to full screen view. Select channel from list.

Multi-screen

Switch to multi-screen view. Select option from list.

Previous Screen

Go to previous channel.

Next Screen

Go to next channel.

Start Auto-switch

Enable auto-switching between channels.

Start Recording

Start all-day normal recording or motion detection recording for all channels.

Quick Set

Set video output mode to Standard, Bright, Gentle, or Vivid.

Today’s Video

Play back day’s video of current channel.

Aux Monitor

Disable main output and switch to auxiliary output. Aux monitor must be
connected.

Summary of Contents for HRGX161























































































































































Search results

Summary of Contents for HRGX161

Reviews:

Related manuals for HRGX161

Brands by name

Popular brands

Honeywell HRGX161, User Manual

Search results

Summary of Contents for HRGX161

Reviews:

Related manuals for HRGX161

Brands by name

Popular brands