Honeywell HERMetic UTImeter Gtex Chem IIC, Operation And Service Manual, Page: 31 / 83

50489/GTEX Chem IIC/1805 UTImeter Gtex Chem IIC
31
5.2 Selecting the temperature resolution
The temperature reading can be given with 1 or 2 digits after the dot. Select the appropriate resolution as
shown on Figure 9-4.
Figure 9-4
-
Switch on the equipment,
-
Wait until the temperature is displayed,
-
Press on "+" to enter the settings menu,
-
Press on "enter", "LED menu" is displayed,
-
Press on "+"; "T. unit" is displayed,
-
Press on "+", "Resol." is displayed,
-
Press on "enter",
-
Select the resolution by pressing on "+" one or more times, the pointer shows the resolution selected,
-
Press "-" two times to come back in measurement mode.
The new setting is stored in the permanent memory.
ON
UTImeter
Battery
Init.
********
*
25.94 ° C
Settings
T. unit
Resol. >0.0 °
> 0.00 °
Ver x.xx
LED menu

97%
E
E
-
-
- +
+
+
+
+
+
-