Honeywell Granit 1911i, User Manual

Page: 221 / 266

11 - 15
Data Formatter Data Formatter Off DFM_EN0 6-12
*Data Formatter On,
Not Required,
Keep Prefix/Suffix DFM_EN1 6-12
Data Format Required,
Keep Prefix/Suffix DFM_EN2 6-12
Data Formatter On,
Not Required,
Drop Prefix/Suffix DFM_EN3 6-12
Data Format Required,
Drop Prefix/Suffix DFM_EN4 6-12
Data Format Non-Match Error Tone *Data Format Non-Match Error
Tone On DFMDEC0 6-13
Data Format Non-Match Error
Tone Off DFMDEC1 6-13
Primary/Alternate Data Formats Primary Data Format ALTFNM0 6-13
Data Format 1 ALTFNM1 6-13
Data Format 2 ALTFNM2 6-13
Data Format 3 ALTFNM3 6-13
Single Scan Data Format Change Single Scan-Primary
Data Format VSAF_0 6-14
Single Scan-Data Format 1 VSAF_1 6-14
Single Scan-Data Format 2 VSAF_2 6-14
Single Scan-Data Format 3 VSAF_3 6-14
Symbologies
All Symbologies All Symbologies Off ALLENA0 7-1
All Symbologies On ALLENA1 7-1
Codabar Default All Codabar
Settings CBRDFT 7-2
Off CBRENA0 7-2
* On CBRENA1 7-2
Codabar Start/Stop Char. * Don’t Transmit CBRSSX0 7-2
Transmit CBRSSX1 7-2
Codabar Check Char. * No Check Char. CBRCK20 7-2
Validate, But Don’t Transmit CBRCK21 7-2
Validate, and Transmit CBRCK22 7-2
Codabar Concatenation *Off CBRCCT0 7-3
On CBRCCT1 7-3
Require CBRCCT2 7-3
Codabar Message Length Minimum (2 - 60) *4 CBRMIN## 7-3
Maximum (2 - 60) *60 CBRMAX## 7-3
Code 39 Default All Code 39
Settings C39DFT 7-4
Off C39ENA0 7-4
*On C39ENA1 7-4
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page