Honeywell Granit 1911i, User Manual

Page: 222 / 266

11 - 16
Code 39 Start/Stop Char. * Don’t Transmit C39SSX0 7-4
Transmit C39SSX1 7-4
Code 39 Check Char. * No Check Char. C39CK20 7-4
Validate, But Don’t
Transmit C39CK21 7-4
Validate,
and Transmit C39CK22 7-4
Code 39 Message Length Minimum (0 - 48) *0 C39MIN## 7-5
Maximum (0 - 48) *48 C39MAX## 7-5
Code 39 Append *Off C39APP0 7-5
On C39APP1 7-5
Code 32 Pharmaceutical (PARAF) *Off C39B320 7-5
On C39B321 7-5
Code 39 Full ASCII *Off C39ASC0 7-6
On C39ASC1 7-6
Code 39 Code Page C39DCP 7-6
Interleaved 2 of 5 Default All Interleaved
2 of 5 Settings I25DFT 7-7
Off I25ENA0 7-7
*On I25ENA1 7-7
Interleaved 2 of 5 Check Digit * No Check Char. I25CK20 7-7
Validate, But Don’t
Transmit I25CK21 7-7
Validate, and Transmit I25CK22 7-7
Interleaved 2 of 5 Message Length Minimum (2 - 80) *4 I25MIN## 7-7
Maximum (2 - 80) *80 I25MAX## 7-7
NEC 2 of 5 Default All NEC
2 of 5 Settings N25DFT 7-8
Off N25ENA0 7-8
*On N25ENA1 7-8
NEC 2 of 5 Check Digit * No Check Char. N25CK20 7-8
Validate, But Don’t
Transmit N25CK21 7-8
Validate, and Transmit N25CK22 7-8
NEC 2 of 5 Message Length Minimum (2 - 80) *4 N25MIN## 7-9
Maximum (2 - 80) *80 N25MAX## 7-9
Code 93 Default All Code 93
Settings C93DFT 7-9
Off C93ENA0 7-9
*On C93ENA1 7-9
Code 93 Message Length Minimum (0 - 80) *0 C93MIN## 7-9
Maximum (0 - 80) *80 C93MAX## 7-9
Code 93 Append On C93APP1 7-10
*Off C93APP0 7-10
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page