1
Programming Quick Guide
- FS5100D
Installation
Make sure that the scanner has the correct cable to
plug in the PC as below described:
*Note
: Please install PL-2303 driver for USB serial
Reset Configuration to Defaults
If you are unsure of the scanner configuration or have
scanned the incorrect codes, please scan from A1 to A6 for
USB HID or B1 for RS232 or USB Serial. This will reset the
scanner to its factory defaults.
HID
RS232/
USB Serial
A1
B1
A2
A3
A4
A5
A6
*
Note
: Please install PL-2303 driver for USB Serial.
Keyboard Country
(For USB HID only)
Scan the appropriate country code as below to program the
keyboard layout for your country or language. As a general
rule, the following characters are supported, but need special
care for countries other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
USA
(Original setting)
Italian
Norway
France
Germany
Vietnam
Sweden
Spain
Denmark
Portugal
Switzerland
Hungary
%%RSDF
%%RSDF
%SETUP
8002
0
D
%%%END
%+-$.00
%+-$.06
%+-$.01
%+-$.07
%+-$.02
%+-$.08
%+-$.03
%+-$.09
%+-$.04
%+-$.10
%+-$.05
%+-$.11
