Honeywell Granit 1911i, User Manual

Page: 220 / 266

11 - 14
Partial Sequence Transmit Partial Sequence SEQTTS1 4-21
*Discard Partial Sequence SEQTTS0 4-21
Require Output Sequence Required SEQ_EN2 4-22
On/Not Required SEQ_EN1 4-22
*Off SEQ_EN0 4-22
Multiple Symbols On SHOTGN1 4-22
*Off SHOTGN0 4-22
No Read On SHWNRD1 4-22
*Off SHWNRD0 4-22
Video Reverse Video Reverse Only VIDREV1 4-23
Video Reverse and Standard Bar
Codes VIDREV2 4-23
*Video Reverse Off VIDREV0 4-23
Working Orientation *Upright ROTATN0 4-23
Vertical, Bottom to Top (Rotate
CCW 90°) ROTATN1 4-24
Upside Down ROTATN2 4-24
Vertical, Top to Bottom (Rotate CW
90°) ROTATN3 4-24
Prefix/Suffix Selections
Add CR Suffix to All Symbologies VSUFCR 5-2
Prefix Add Prefix PREBK2## 5-2
Clear One Prefix PRECL2 5-2
Clear All Prefixes PRECA2 5-2
Suffix Add Suffix SUFBK2## 5-3
Clear One Suffix SUFCL2 5-3
Clear All Suffixes SUFCA2 5-3
Function Code Transmit *Enable RMVFNC0 5-3
Disable RMVFNC1 5-3
Intercharacter Delay Range 0 - 1000 (5ms increments) DLYCHR## 5-3
User Specified
Intercharacter Delay Delay Length
0 - 1000 (5ms increments) DLYCRX## 5-4
Character to Trigger Delay DLY_XX## 5-4
Interfunction Delay Range 0 - 1000 (5ms increments) DLYFNC## 5-4
Intermessage Delay Range 0 - 1000 (5ms increments) DLYMSG## 5-5
Data Formatter Selections
Data Format Editor *Default Data Format (None) DFMDF3 6-1
Enter Data Format DFMBK3## 6-2
Clear One Data Format DFMCL3 6-2
Clear All Data Formats DFMCA3 6-2
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page