Honeywell Granit 1911i, User Manual

Page: 76 / 266

3 - 14
Batch Mode Beep
When scanning in Inventory Batch Mode (page 3-14), the scanner beeps every time a bar code is scanned. If using a
Granit scanner, it also vibrates. When Batch Mode Beep is On , you will also hear a click when each bar code is sent to the
host . If you do not want to hear these clicks, scan Batch Mode Beep Off . Default = Batch Mode Beep On.
Batch Mode Storage
When a scanner is storing data during a Batch Mode process, you can select whether the data is stored in Flash memory
or in RAM.
Flash Storage: The scanner writes any untransmitted data to flash memory prior to powering down. The data will still be
there when the scanner powers back up. However, the scanner will power down, even with untransmitted data, if it reaches
a power down timeout or if the battery power is very low.
RAM Storage : The scanner will not power down while it contains data that has not been transmitted to the base or Access
Point, even if it reaches a power down timeout. However, if the scanner runs out of battery power, it will power down and
the data will be lost.
Default = Flash Storage.
Inventory Batch Mode
Persistent Batch Mode
Batch Mode Beep Off
* Batch Mode Beep On
* Flash Storage
RAM Storage