Honeywell Granit 1911i, User Manual

Page: 243 / 266

13 - 1
13
Maintenance
Repairs
Repairs and/or upgrades are not to be performed on this product. These services are to be performed only by an authorized
service center (see
Customer Support on page 14-1).
Maintenance
Your device provides reliable and efficient operation with a minimum of care. Although specific maintenance is not required, the
following periodic checks ensure dependable operation:
Cleaning the Scanner
The scanner or base’s housing may be cleaned with a soft cloth or tissue dampened with water (or a mild detergent-water
solution.) If a detergent solution is used, rinse with a clean tissue dampened with water only.
Cleaning the Window
Reading performance may degrade if the scanner’s window is not clean. If the window is visibly dirty, or if the scanner isn’t
operating well, clean the window with one of the cleaning solutions listed for
Health Care Housing , below.
Health Care Housing
Some configurations of Xenon scanners are available with an external plastic housing that is designed to resist the effects
of harsh chemicals in a health care environment. The plastic is crystalline in nature, which helps prevent chemicals from
seeping through the housing.
Important! The following cleaning solutions have been tested to assure safe cleaning of your scanner’s disinfectant-ready
housing. They are the only solutions approved for use with these scanners. Damage caused by the use of cleaners other
than those listed below may not be covered by the warranty.
• Sani-Cloth
®
HB wipes
• Sani-Cloth
®
Plus wipes
• Super Sani-Cloth
®
wipes
• Isopropyl Alcohol wipes (70%)
• CaviWipes
™
• Virex
®
256
• 409
®
Glass and Surface Cleaner
• Windex
®
Blue
• Clorox
®
Bleach – 10%
• Gentle dish soap and water
Do not submerge the scanner in water. The scanner’s
housing is not watertight.
Do not use abrasive wipes or tissues on the scanner’s
window – abrasive wipes may scratch the window. Never
use solvents (e.g., acetone) on the housing or window –
solvents may damage the finish or the window.
!
Caution:
Do not submerge the scanner in water. The scanner’s
housing is not watertight.
Do not use abrasive wipes or tissues on the scanner’s
window – abrasive wipes may scratch the window. Never
use solvents (e.g., acetone) on the housing or window –
solvents may damage the finish or the window.