Honeywell Enhanced Micro TDC 3000, User Manual, Page: 76 / 172

Enhanced Micro TDC 3000 User’s Manual 4-20 9/95
4.7.2
4.7.2 Build Free Format Logs
Free Format Logs are printed logs whose form and content are user defined. If you do not
want to build any Free Format Logs at this time, skip to the next section.
To activate Free Format Log building, call up the Engineering Main Menu; then select
FREE FORMAT LOGS
.
Detailed Free Format Log building information is in the following publications in the
Implementation/Engineering Operations - 1 binder:
• Free Format Log Form Instructions
• Free Format Log Data Entry
Section 26 in the System Startup Guide provides a step by step example of how to
configure a Free Format Log.
4.7.3 Configure Buttons
Several user-configurable buttons are provided on the Operator’s Keyboard and the
Engineer’s Keyboard (PF keys). These buttons can be configured to call up standard
displays, custom displays (schematics), and to accomplish actions specified by most of the
TDC 3000X actors. Note that the configured button actions execute when the Operating
Personality is running. A fairly extensive prebuilt button configuration file has been
shipped with the system. It is file BUTTON01 on the &D01 volume. Appendix B to this
manual describes the preconfigured buttons. If you do not want to make any changes or
additions, skip to the next section.
To activate Button Configuration, on the Engineering Main Menu, select
BUTTON
CONFIGURATION.
To make changes or additions, read in the existing file. The command is
Read NET>&D01>Button01 (or you can build a new file). After changes or additions
compile the button file.
Detailed button configuration information is in the following publications in the
Implementation/Engineering Operations binders:
• Button Configuration Form Instructions (binder 1)
• Button Configuration Data Entry (binder 1)
• Actors Manual (binder 2)
Section 24 in the System Startup Guide provides a step-by-step example of how to
configure a few buttons.