Honeywell Centraline FALCON, User Manual, Page: 17 / 276

USER GUIDE FALCON
EN2Z-0962GE51 R0715
13
Fig. 2. Access to Excel Web controller via crossover cable
To locally connect to the Excel Web controller via Ethernet, a crossover cable
can be used. Hence it has temporarily no connection to any other network and
the Excel Web controller is not reachable in the network.
The crossover cable connection type has the highest transfer rate (100 Mbit/s),
but when applied, the IP address settings of the client need to be changed.
Procedure:
See Establish Local Ethernet Connection via Crossover Cable section in CARE
User Guide EN2B0182GE51 / 74-5587.
•
USB (local access)
Fig. 3. Access to Excel Web controller via USB
To locally connect to the Excel Web controller via USB interface, a D-Link DUB-
E100 USB 2.0 Fast Ethernet adapter can be used.
The USB connection type is recommended for the initial setup of an Excel Web
controller due to a reasonable transfer rate (2 Mbit/s) and because no IP address
changes are necessary after installation. In addition, the LAN connection can be
used in parallel and uninterruptedly.
Permanent IP address, factory default
For access via USB, the Excel Web has a permanent factory default IP address
192.168.252.20 and Network Mask 255.255.255.0. Your PC's IP address of the
Belkin USB network adapter must match the Excel Web controller's default IP
address subnet: We recommend using 192.168.252.21.
Procedure:
See Establish Local Connection via USB Cable section in CARE User Guide
EN2B0182GE51 / 74-5587.
IP Address Allocation
To establish any of the described connections, IP addresses must be allocated to
the relevant network components such as BACnet client, Excel Web controller(s)
and USB network adapter.
For further information, please refer to "Setup Excel Web Controller" section in
CARE User Guide EN2B0182GE51 / 74-5587.
•
Internet (remote)