Honey Bee Grain Belt Plus, Owner'S Manual

Page: 39 / 179

Honey Bee Manufacturing Ltd.
Grain Belt Plus Header – Owner's Manual
Removing the Storage Axle
Axle components are heavy, exercise caution in handling them.
1. Raise the header until the wheels are
slightly above ground. Ensure the
weight of the header is supported by the
combine, and suitable blocking is in
place under the subframe to prevent the
header from falling.
2. Refer to Illustration 3-9: Storage Axle
Assembled , and Illustration 3-10:
Storage Axle - Detail .
3. Remove pins 5 and 6 and slide the
wheel assemblies out of the axle ends.
4. If you have the gauge wheel option, see
Illustration 3-13: Gauge Wheel Installed,
page 38.
5. Remove pin 3 and lower the end of this
tube to the ground.
6. Support the axle, and remove pins 1 and
2.
7. Lower the axle to the ground.
8. Store the axle in a safe and secure
location, as there is no storage bracket
on the Grain Belt Plus Header for the
storage axle.
Rev. 07 - 07/29/08 37
Illustration 3-9: Storage Axle Assembled
Illustration 3-10: Storage Axle - Detail