Honey Bee Grain Belt Plus, Owner'S Manual

Page: 82 / 179

Honey Bee Manufacturing Ltd.
Grain Belt Plus Header – Owner's Manual
3. Move forward slowly, paying special
attention to the alignments mentioned
above. Ensure that the tilt cylinder
pins will barely clear the bottoms of
the mounting plate notches. If the
sub-frame is too much lower than
this, you may encounter interference
between the guide plate sides and
the mounting plate notches.
4. When the tilt cylinder pins are directly
below the mounting plate notches
and the lift arms are fully inserted into
the frame struts, slowly raise the sub-
frame until the tilt cylinder pins are
fully seated in the mounting plate
notches.
Shut combine down, engage the emergency brake, and wait for all moving
parts to stop before leaving cab.
Rev. 07 - 07/29/08 80
Illustration 8-2: Guide Plate Alignment
Illustration 8-3: Sub-Frame Installed