Honey Bee Grain Belt Plus, Owner'S Manual

Page: 49 / 179

Honey Bee Manufacturing Ltd.
Grain Belt Plus Header – Owner's Manual
3. Disconnect the telescoping drive shaft from
feeder house shaft. Secure the drive shaft in
the storage bracket as shown in the example to
the right.
4. Uncouple the multi link (hydraulic lines)
connecting the header to the combine, and
store it in the bracket provided on the combine.
5. Disconnect the combine return quick coupler
from the upper left corner of the subframe.
6. Disconnect all electrical wires running from the
combine to the draper table. Secure the
combine hoses and electrical plugs.
7. Retract or remove all lock pins, hooks or bolts
which secure the subframe to the feeder house
of combine.
Convert Integral Axle to Transport Position
1. Remove hitch pins from gauge wheel spindles,
and remove left and right gauge wheels from
gauge wheel assemblies.
2. Remove hitch pin (3) from collapsed transport
axle, allowing axle to drop down into transport
position.
For instructions on installing the
storage axle, see the Removing the
Storage Axle section, and reverse the
procedures shown there. For the
Transport Trailer option, see that
operator's manual.
3. Insert Hitch Pin (3) as shown here to secure the
axle in transport position. Ensure the pin is
through the holes in both tubes.
4. Remove Hitch Pin (2) from the front axle tube,
slide the inner axle out to the extended position,
line up the holes, and reinsert pin (2).
5. Insert the gauge wheel spindles into the transport axle as shown. Line up the holes,
and secure them with hitch pins (1 & 4.)
Rev. 07 - 07/29/08 47
Illustration 3-23: Release the Locks
Illustration 3-24: Axle 'Up' Position
Illustration 3-25: Axle 'Down' Position