Honey Bee Manufacturing Ltd.
Grain Belt Plus Header – Owner's Manual
Pan Inserts
Pan inserts are installed underneath the finger
auger against the adapter plate. They improve the
feeding of material through to the combine.
Without the pan inserts, crops will jam up under
the finger auger. Ensure that the pan inserts are
properly installed and secure.
Auger Drive Assembly
Power is transferred from the combine to the
header via the header drive shaft. As the drive
shaft turns, power is transferred through the gear
box, to the Eaton variable speed pump assembly.
This pump assembly has a charge pump, which
supplies oil to the main pump
Hydraulic oil is drawn out of the header’s reservoir,
and then sent through the hydraulic circuit, where it
is used to power the auger, knife, draper, and
feeder deck motors.
The linear actuator enables the operator to reverse
the flow in the hydraulic circuit for clean-out
purposes.
For further details on hydraulic routing, refer to the
“HYDRAULICS” chapter in this manual.
Drive shaft – Walterscheid
For complete operating information on the installation, service, and safety instructions for
input drive lines and clutches, refer to the operator’s manual shipped with each drive shaft.
These instructions are intended to point out some of the basic safety situations which may be
encountered during the normal operation and maintenance of your machine and to suggest
possible ways of handling these situations.
Read the manufacturer’s operator’s manual before operating the equipment. If there are no
manuals with the machine, request them from the manufacturer. Study them before you start
work. If you don’t understand any of the material in the manuals, ask your supervisor or
equipment dealer to explain it to you.
Rev. 07 - 07/29/08
124
Illustration 11-6: Auger Drive
Illustration 3: Pan Inserts
Pan Inserts
Summary of Contents for Grain Belt Plus
