Honey Bee Grain Belt Plus, Owner'S Manual

Page: 142 / 179

Honey Bee Manufacturing Ltd.
Grain Belt Plus Header – Owner's Manual
Special Series Lifter
The bottom runner of the Special Series lifter
should be parallel to the ground. To find the
correct mounting position of the lifters for a given
platform, drive the combine onto a flat surface
(concrete, asphalt).
Mount one lifter in the middle of the platform.
Lower platform until crop lifter just touches the
ground. The runner of the lifter should be parallel
to the ground. If it is not, change lock pin
positions and if necessary, vary number of flat
washers until the correct position is found.
Adapter Plate
All Grain Belt Plus tables are equipped with the
same style of sub-frame and center feed auger.
The make of combine that you use will require
the proper adapter plate which is bolted to the
back of the subframe. Different adapter plates
are available for Agco, Case IH, CAT, John
Deere, and New Holland combines.
Ensure that all nuts, bolts, and washers are
present and secured properly to the sub-frame
prior to mounting on the combine.
Rev. 07 - 07/29/08 140
Illustration 13-4: Special Series Lifter
Illustration 13-5: Adapter Plate and Sub
Frame