Honey Bee Manufacturing Ltd.
Grain Belt Plus Header – Owner's Manual
Guards
EasyCut guards are manufactured from heat treated
spring steel. The guards have beveled cutting edges
at the top and bottom, which enable them to cut
better and last longer.
1. When replacing guards always mount the new
guard with the SCH stamp to the top. Be sure
the knife is on top of the bridge roller spacer.
The crimp lock nut on the guard bolt should
always be on the top.
2. Alignment of the guards is critical. Before
tightening the guard bolts, push the spacer
bar as far back on the cutter bar as possible,
and pull the guard ahead as far as possible.
Sight down the cutter bar to be sure all of the
guards are aligned. Tighten guard bolts.
Bridge Rollers
The bridge roller bar aids in guiding the travel of the knife. The bridge rollers, allow the knife
to slide freely back and forth as it cuts, without any friction to the back of the spacer bar. The
sickles should rest on top of the spacer lip at the base of the roller. The backs of the sickles
should be in firm contact with the center body of the roller. (See
Illustration 12-2: Guards -
Detail
.)
Sickle Sections
The sickle sections of the knife are installed with alternated cutting surfaces. One section will
have the cutting bevel facing up, and the next will have the cutting bevel facing down. The
edges must be in good condition to obtain proper cutting.
Rev. 07 - 07/29/08
130
Illustration 12-2: Guards - Detail
Summary of Contents for Grain Belt Plus
