Honda 2007 Civic Coupe, Owner'S Manual

Page: 395 / 509

Turn on the headlights to test the
new bulb.
Put the battery back to its original
position, reinstall the nut on the
stay and tighten it securely.
Reinstall the expansion tank on its
holder, then put the coolant tubes
back in place. Reinstall the over
flow tube to the expansion tank
securely. Put the upper part of the
washer fluid reservoir back in
place.
Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place, and clip the end into
the slot.
Push the electrical connector onto
the new bulb. Make sure it is
connected securely.
Reinstall the cover over the back
of the headlight assembly and turn
it clockwise to lock it in place.
Remove the electrical connector
from the bulb by pulling the
connector straight back.
Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way, and remove the bulb.
5.
6.
7.
8.
9.
3.
4.
On the left side
On the right side
Lights
Maintenance
392
BULB
CONNECTOR
06/12/06 11:21:52 32SMR600_395