Honda 2007 Civic Coupe, Owner'S Manual

Page: 101 / 509

Rear Seat Belt Use Monitor
When you turn the ignition switch to
the ON (II) position, the upper
segment of the multi-information
display shows the rear seat belt use.
This monitor goes off after about 30
seconds. It will also go off when you
change the display by pressing the
system message button on the
steering wheel.
The seat belt system detects any
seat belt use of all three or two
(Type-R model) rear seat seating
positions according to each seat belt
buckle latch function. The system
shows you how many rear seat belts
are being used and reminds you and
your passengers to fasten their seat
belts. According to the rear seat belt
use (1 through 3 or 1 through 2), you
will see the indicator(s) highlighted
on the right side of the upper segment.
Multi-Information Display
Instruments and Controls
98
Seat belts in right and centre
positions are used.
Except Type-R Type-R
Except Type-R
Type-R
Seat belt in right positions is used.
06/12/06 10:42:05 32SMR600_101