Honda 2007 Civic Coupe, Owner'S Manual

Page: 250 / 509

If your vehicle’s battery goes dead,
or is disconnected, the traffic
announcement volume level will be
reset to the default setting (level 9).
To turn off the TA function, press
the TA/PTY button again. TA will go
out from the display. You can also
turn the TA function on or off on the
audio display on the navigation
screen (see page
).
If you use seek or auto select with
the TA function on, the system
searches only TP stations.
Press the AUDIO button on the
control panel to view the audio
display on the navigation screen,
then push down the selector on the
interface dial to select the function
display. Turn the dial to select the
PTY, then press the ENT on the
interface dial.
To adjust the volume of the traffic
announcement, turn the power/
volume knob while the
announcement is broadcasting. The
adjusted volume level will be stored,
then that level will be used on the
next traffic announcement. You
cannot adjust the volume below the
minimum level. The volume of the
PTY NEWS or the PTY ALARM
function can also be adjusted (see
page
).
This function shows you the
program type of the selected RDS
station. For example, if the station is
broadcasting drama, DRAMA is
shown in the display. If it is a station
of scientific programs, SCIENCE is
shown. The principal PTYs are
shown on page
. 249
251
244
CONTINUED
Audio System (on vehicles with navigation system)
Features
PTY (Program Type) Display
Function
247
06/12/06 11:01:32 32SMR600_250