Honda 2007 Civic Coupe, Owner'S Manual

Page: 127 / 509

If you fail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display for a few seconds. The
display returns to the setting mode.
Repeat the setup.
You can select the measurement
standard in the trip computer as
described as follows. There are three
selectable modes; AUTO, KM and
MILES.
To exit the customizing mode, select
the exit mode by pressing the INFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the normal display.
When your selection is successfully
completed, the display shows the
appropriate setting; ‘‘SETTING IGN
OFF,’’ ‘‘SETUP TRIP A,’’ or ‘‘SETUP
TRIP B’’ for a few seconds, then
goes back to the ‘‘CHG SETTING’’
display. Press the SEL/RESET
button, then press the INFO button
repeatedly to select another
customizing mode.
On the right-hand drive type only
Display Unit
Multi-Information Display
Instruments and Controls
124
IGN OFF is selected.
06/12/06 10:45:19 32SMR600_127