Honda 2007 Civic Coupe, Owner'S Manual

Page: 330 / 509

Before starting, make sure the gear
position indicator in the upper
display shows you that the
transmission is shifted properly.
If the gear position indicator blinks,
the transmission cannot be shifted.
Return the shift lever to neutral,
pause, then move it again while
pressing the brake pedal.
The shift lever has three positions:
neutral, reverse and driving positions.
It must be in neutral and the brake
pedal must be pressed to start the
engine. You must also press on the
brake pedal when you move the shift
lever out from neutral to the driving
position or reverse. When you turn the ignition switch to
the ON (II) position, the segment
display of the gear position indicator
comes on, then it shows the
appropriate shift lever position (A, N
or R). If the battery is not well
charged or goes dead, you must
move the shift lever to neutral and
press on the brake pedal for about 3
seconds to show the shift lever
position after reconnecting the
battery or jump starting.
CONTINUED
Driving
i-SHIFT (Automated Manual Transmission)
Shif ting
327
Upshift
Downshift
DRIVING POSITION
SEGMENT DISPLAY
06/12/06 11:12:40 32SMR600_330