Honda 2007 Civic Coupe, Owner'S Manual

Page: 119 / 509

If you do not press any button, the
display returns to the normal display
after about 10 seconds.
After pressing the SEL/RESET
button, the display shows your
setting for a few seconds, then goes
back to the normal display.
After your selection, press and
release the INFO button to move to
the exit mode. Press the SEL/
RESET button to enter your setting.
If you press the INFO button, the
display goes back to the setting
mode. Repeat the setup.
Select the desired setting speed,
then press the SEL/RESET button.
Each time you press the SEL/
RESET button, the selected speed
icon switches between on and off.
According to the selected display,
you can select the alarm speed
between the two setting speeds:
50 km/h and 80 km/h in km/h mode,
or 30 mph and 50 mph in mph mode.
Each time you press and release the
INFO button, the selected icon is
changed between the setting speeds
and the exit icon.
Multi-Information Display
Instruments and Controls
116
Alarm off Alarm on
Alarm on
06/12/06 10:44:19 32SMR600_119