114
6-7
2
1
6-8
Maintenance
6.4
Storage
When the unit will be stored for a few weeks or longer,
prepare the unit correctly:
•
Shut down the unit properly (
F
5.4.4).
•
Remove the stub shaft from the balancer.
•
Apply a thin layer of non-corrosive oil on all threads
and cones.
•
Wrap oiled items in paper to protect them against
dust.
Before putting the unit into use again, clean all oiled
parts.
6.5 Changing the fuse
Refer to
Figure 6-7
.
•
Switch off the unit.
•
Unplug the power cable from the power outlet.
•
Remove the power cable from the unit connector
(
1, Fig. 6-7
).
•
Pull out the fuse holder (
2, Fig. 6-7
).
•
Replace the damaged fuse with another fuse having
an identical rating.
•
Return the unit to its original functioning condition,
by following the steps above in reverse order.
6.6
Cleaning
6.6.1
Cleaning the Monitor
Refer to
Figure 6-8
—
Clean the display with a soft, dry cloth.
..
..
..
.
..
. .
..
.
