92
5-51
5-52
5-53
5-53a
5-52a
29
16
1
26
2
1
Operation
The OPTIMISATION “OP.9” screen is displayed
(
Fig.
5-51
).
Figure 5-51
OPTIMISATION “
OP.9
”
START is displayed on the screen
—
Perform the wheel measuring run.
A measuring run is performed.
The OPTIMISATION “OP.10” screen is displayed,
outside (
Fig. 5-52
)
or the OPTIMISATION “OP.10”
screen appears, inside (
Fig. 5-53
).
With indication H0
Optimum condition has been achieved and cannot be
improved.
—
Continue as shown on screen BALANCING (
Fig.
5-51
).
Indication H2
a)
Silent wheel running conditions cannot be improved.
—
Press
ESC
or
STOP
(
1
,
16
,
Fig.5-52a
) to quit
Optimisation.
b)
However, it is possible to readjust the tyre with rim to
obtain a considerable reduction of weights (i.e. smaller
weights) without having an adverse effect on wheel
running noise.
—
Press
MINIMISATION
(
29
,
Fig.5-52a
)
Splitting faults
At this stage of the program the faults index is available
(
Fig.5-53a
).
—
Press XXX.
Two values appear, indicating how the total wheel
unbalance is split as a percentage between the
rim and the tyre;
Unbalance percentage attributable to the Rim (
1
).
Unbalance percentage attributable to the Tyre (
2
).
—
Continue as shown on screen OPTIMISATION
“OP.10” (
Fig. 5-53b
).
..
..
..
.
..
. .
..
.