Hofmann geodyna 7340, Operation Manual

Page: 94 / 160

94
5-53b
5-55
5-54
5-56
26
26
29
26
Operation
Figure 5-53b OPTIMISATION “ OP.10 ”, outside
— Rotate the wheel into marking position following the
arrows.
— In this position make a double mark on the tyre
outer side exactly above the chuck.
— Confi rm by pressing menu key 26 .
The OPTIMISATION “OP.11” screen is displayed ( Fig.
5-55 ).
Figure 5-54 OPTIMISATION “ OP.10 ”, inside
If the tyre cannot be turned over on the rim (e.g.:
Asymmetrical and Directional),
— press the menu key 29 , then
— continue as shown on screen OPTIMISATION
“OP.10” ( Fig. 5-53b ).
If the tyre can be turned over on the rim;
— Rotate the wheel into marking position following the
arrows.
— In this position make a double mark on the inside
of the tyre, exactly above the chuck.
— Turn the tyre over on the rim (tyre changer) .
— Confi rm by pressing menu key 26 .
The OPTIMISATION “OP.11” screen is displayed ( Fig.
5-55 ).
Figure 5-55 OPTIMISATION “ OP.11 ”
— Push the tyre on the rim until the double mark
coincides with the valve (use tyre changer).
— Confi rm by pressing menu key 26 .
The OPTIMISATION “OP.12” screen is displayed
(
Fig.
5-56 ).
..
..
..
.
..
. .
..
.