Hofmann geodyna 7340, Operation Manual

Page: 102 / 160

102
5-70
5-72
5-71
5-73
5-74
29
26
Operation
Fig. 5-70 MINIMISATION “ Un.10 ”, outside
— Rotate the wheel into marking position following the
arrows
— In this position make a double mark on the tyre
outer side exactly above the chuck.
— Confi rm by pressing menu key 26 .
The MINIMISATION “Un.11” is displayed ( Fig. 5-72 ).
Figure 5-71 MINIMISATION “ Un.10 ”, inside
If the tyre cannot be turned over on the rim (e.g.:
Asymmetrical and Directional),
— press the menu key 29 , then
— Continue as shown on screen
MINIMISATION “Un.10” ( Fig. 5-70 ).
If the tyre can be turned over on the rim;
— Rotate the wheel into marking position following the
arrows
—
In this position make a double mark on the tyre, on
the inside of the wheel, exactly above the chuck.
— Turn the tyre over on the rim (tyre changer) .
— Confi rm by pressing menu key 26 .
The MINIMISATION “Un.11” is displayed ( Fig. 5-72 ).
Figure 5-72 MINIMISATION “ Un.11 ”
— Push the tyre on the rim until the double mark
coincides with the valve (use tyre changer).
— Confi rm by pressing menu key 26 .
The MINIMISATION “Un.12” is displayed ( Fig. 5-73 ).
..
..
..
.
..
. .
..
.