4 - 30
4.3.8
Event Signal Code
The event should be executed manually. The event function works upon input of an event
code. It is used for starting an external device, for stopping the pump, for sounding the
buzzer, etc.
Also, if a pressure limiter error occurs, a signal can be output at event code No. 4.
Monitor screen
UTLTY
UTILITY CONDITION=1 UNIT=2 FLUSH=
4 EVENT 4 LINK= OTHERS=6
Select EVENT.
EVENT SET:
PRESS LIMIT=1,
EVENT CODE=2, [--]
1
[PRESS LIMIT]
PRESS LIMIT: NONE=0,
PULSE=1, LEVEL=2
[--]
<0-2>
1
(EVENT NO. 4)
Enter the desired code. If a pressure limit error is
detected, an event signal is output at EVENT No. 4.
Monitor screen
SET EVENT CODE:
[--]
<0-92>
Input event code.
Monitor screen