background image

E-37

 Cleaning

Insert the power plug into the outlet and 

press the          power button.

8

 After discarding the dirt, make sure that the “Empty Dust” 

  indicator is not lit. 
  (The humidifying operation time is reset when the power cord 
  is unplugged only if the “Filter Cleaning” indicator is lit.)

Make sure that the indicator is not lit.

6

5

7

Attach the auto self clean unit

Attach the unit cover

Attach the rear panel     (P.E-15)

Slide the lock button until a clicking sound is heard and then attach the auto self clean unit.

Insert the protruding portion below the auto self clean unit into the hole of the auto self clean unit attachment area.

Tab of unit cover

Tab of unit cover

 Do not install the auto self clean unit tilted. It may cause an abnormal sound or malfunction.

CAUTION

 When setting Auto Self Clean, be sure to attach the auto self clean unit.

 When using the product with the auto self clean unit removed, do not set Auto Self Clean.       

(P.E-26)

If the Auto Self Clean operation is run with the auto self clean unit removed, the operation sound 
becomes louder for several minutes while trying to detect the auto self clean unit.

CAUTION

Insert the tab of the unit cover into the hole 

of the dust box.

Press down the tab of the unit cover and 

close the cover.

Protruding portion below the auto self clean unit

Hole of auto self clean unit attachment area

Attach the auto self 

clean unit horizontally.

Lock button

EP-L110E_EN.indd   37

EP-L110E_EN.indd   37

2/7/2018   10:55:06 AM

2/7/2018   10:55:06 AM

Summary of Contents for EP-L110E





















































Reviews: