Hitachi EP-L110E Instruction Manual Download Page 4

Page: 4 / 52

E-4

Name of Each Component / Accessories

Air outlet

(stainless steel net)

Power plug

Power cord

Glass panel

Handle

Humidifying filter

Tank cover

Water tank

Names of Each Component

CAUTION

Power button

Flap (stainless steel flap)

(P.E-21)

The flap controls the wind in vertical direction
according to the operation mode.

Side cover

Purifier

Vibration Sensor

(P.E-29)

Senses impact and tilting.
(Installed inside the unit)

Caster

To prevent falls, the movement is
only in sideways direction. (Located
at the base of the unit)

Air inlet

Water tray

Handle

Float switch

CAUTION

Touch Operation
Panel

(P.E-6, E-7)

Do not hold the flaps when

moving the unit.

Doing so may cause unexpected
injury when the unit is damaged
and overturned or dropped.

Do not subject the glass panel

(made of tempered glass) to impact

Although tempered glass is
stronger and safer than normal
glass, it can break when subject
to strong impact or force.
In case of scratches or breakage,
stop using and immediately
request repairs.
Refrain from touching the broken
glass.

Senses the presence of cigarette
smoke, dust, pollen, and other
similar air contaminants.

Dust Sensor (P.E-28)

Temperature Sensor (P.E-28)

Odor Sensor (P.E-28)

Senses the odor components in the air.

Senses the air temperature.

Humidity Sensor (P.E-28)

Senses air humidity.

EP-L110E_EN.indd 4

2/7/2018 10:54:50 AM

Summary of Contents for EP-L110E





















































Search results

Summary of Contents for EP-L110E

Reviews:

Brands by name

Popular brands

Hitachi EP-L110E, Instruction Manual

Search results

Summary of Contents for EP-L110E

Reviews:

Brands by name

Popular brands