Hitachi EP-L110E Instruction Manual Download Page 41

Page: 41 / 52

E-41

Cleaning the Deodorizing Filter

(Guide for Cleaning: About Once Every 6 Months)

To maintain deodorizing performance, frequent washing is recommended.

Soak the deodorizing filter

Remove using a vacuum cleaner.

Lightly clean using the nozzle brush of the

vacuum cleaner and vacuum the dust.

Remove dust from the surface

Soak in water or lukewarm water (below 40°C) for about 3 hours.

Dry the deodorizing filter

Dry properly in a well-shaded area. (Place it in a well-ventilated area for about 1 day)

Set the deodorizing filter and attach the panel on the purifier body (P.E-14, E-15)

The deodorizing filter is disposable.

There might be some odor left even if the deodorizing filter has been soaked and cleaned.

Replace filter if the odor becomes a bother.

(P.E-43, E-44)

Nozzle brush

Deodorizing filter

Do not remove the deodorizing filter from its case.

This will damage the filter.

Do not scrub using a brush.

This will damage the filter.

Do not use any detergent.

The detergent smell will cling on to the deodorizing filter and may
damage it.

CAUTION

Do not use when wet. Wipe off any remaining droplets of water.

The water droplets will go out of the air outlet, decreasing deodorizing

effect, and may become the source of odor.

Do not dry using a dryer or heater appliances.

This will cause deformation.

Do not use excessive force on the deodorizing filter.

This will damage the filter.

If the tabs on the case come off, press down the tabs.

CAUTION

Case

Deodorizing filter

Tab

After soaking, some deodorizing agent granules might fall out. However,

the deodorizing performance will not be affected.

Note



If the odor from the air outlet becomes a bother, clean the deodorizing fi lter immediately.



The deodorizing fi lter cannot remove the odor of harmful substances in cigarettes (carbon monoxide, etc.). or continuously occurring odors.



Use in places with strong smells such as cigarettes or barbecue will shorten the life of the deodorizing fi lter.

In such a case, be sure to use the deodorizing fi lter while ventilating the room.

CAUTION

Cleaning

EP-L110E_EN.indd 41

2/7/2018 10:55:10 AM

Summary of Contents for EP-L110E





















































Search results

Summary of Contents for EP-L110E

Reviews:

Brands by name

Popular brands

Hitachi EP-L110E, Instruction Manual

Search results

Summary of Contents for EP-L110E

Reviews:

Brands by name

Popular brands