manualshive.com logo in svg

Hitachi EP-L110E, Instruction Manual

Share
Download
Hitachi EP-L110E Instruction Manual Download Page 45

E-45

Troubleshooting Guide

When a notifi cation is displayed on the temperature/humidity monitor

Notifi cation Display and Details

Solution

The fi lter assembly is not set.

Install the fi lter assembly.
If the same message appears, the fi lter assembly may be deformed and cannot be used.
Replace the fi lter assembly.

The humidifying fi lter is not set.

Install the humidifying fi lter.

The rear panel is not attached.

Attach the rear panel properly. 
Plug the tabs (2 locations) of the upper part of the rear panel and press the left and right 
parts of the lower part until a clicking sound is heard. 

 

(P.E-15)

The vibration sensor has 
detected something.

Unplug from outlet and plug it again.
If the unit fell over and water from the tank is leaking, make sure to unplug it from the out-
let and request repairs.

Fan is not rotating.

Unplug from outlet and plug it again.
If the same message appears, discontinue use, make sure to unplug it from the outlet, 
and request repairs.

Note: If the problem cannot be solved, request repair.

 T

roubleshooting Guide

Replacing the Filter Assembly / Deodorizing Filter

EP-L110E_EN.indd   45

EP-L110E_EN.indd   45

2/7/2018   10:55:12 AM

2/7/2018   10:55:12 AM

Summary of Contents for EP-L110E





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands