E-36
Cleaning
(Continued)
When the Empty Dust Indicator Comes On
The Empty Dust indicator lights up after approximately one year of operation (when the product is oper-
ated continuously) as a guide for cleaning.
The amount of dust differs depending on the environment. Check the dust box of the auto self clean unit
frequently and discard dust even when the Empty Dust indicator is not on. If dust has been accumulated
over the max line, empty out the dust box and clean the unit.
Auto self clean unit
Max line
Max line
MAX line
Remove the rear panel (P.E-14)
Verify that operation has stopped, and then unplug the power cord.
When the purifier is still operating, press the power button to stop operation.
1
2
Remove the auto self clean unit
3
Once you unplug the power cord, the operation time will be reset and the Empty Dust indicator will go off.
(If the “Empty Dust” indicator is off, the auto self clean count will not be reset even if you unplug the power cord.)
Slide the lock button in the direction of the
arrow, and remove the unit.
Remove the unit cover and
discard the dirt
4
CAUTION
Do not lift the air purifier by holding the shaft
of the rear panel.
It deforms the shaft, causing a failure.
Do not forcibly remove the unit with the auto
self clean unit still locked.
Doing so may cause damage.
Press the tab of the unit cover, lift up
and remove the cover, and discard
dust. Remove the unit cover carefully
not to spill dust.
Clean the auto self clean unit, rear
panel, and other parts of the main unit
frequently because dust and dirt get
on them.
(P.E-38, E-39)
Lock button
Shaft
Auto self clean unit
Tab of unit cover
Dust
Unit cover
EP-L110E_EN.indd 36
EP-L110E_EN.indd 36
2/7/2018 10:55:05 AM
2/7/2018 10:55:05 AM
