Hitachi EP-L110E Instruction Manual Download Page 38

Page: 38 / 52

E-38

Cleaning

(Continued)

Attach the brush rotor

Wash the fixed brush and dust box with water

Clean the auto self clean unit

Left shaft

Right shaft

Brush rotor

Note: The shape of the right and left shafts of the brush rotor is different.

Brush rotor

Remove the brush rotor and wash the unit with water

-1

-2

-3

Nozzle brush

Auto self clean unit

Brush rotor

Tab

Remove the rear panel (P.E-14)

Check if the operation has stopped, and then unplug the power cord.

When the unit is still operating, press the power button to stop operation.

Remove the auto self clean unit and unit cover and discard dust (P.E-36)

CAUTION

Do not rub the brush nozzle of the vacuum cleaner with

strong force or with a scourer. Doing so may damage the
brush nozzle or scratch the surface.

Do not use detergent.

CAUTION

Do not remove the fixed brush and gear of the auto self

clean unit.

Do not scrub them with a brush or sponge because it may

break them or damage their surface.

Do not use detergent.

Discard dust, suck dust by lightly tapping the nozzle brush of a vacuum

cleaner, and wipe the unit using a soft cloth.

If the unit is very dirty, remove the brush rotor and wash the unit with water.

Pull up the tab on the right side of the brush rotor and

remove the brush rotor.

Remove dirt using a used soft toothbrush or something

similar while rinsing with water.

Thoroughly remove water, wipe any remaining water with a

dry cloth, and dry the unit in a shade (for approximately one
day in a well-ventilated area).

Wash them with running water.

Thoroughly remove water and let the parts dry in a shade

(approximately one day in a well-ventilated area).

Pass the left shaft of the brush rotor
through the hole of the dust box.

Press the right shaft of the brush rotor
into the dust box.

Fixed side of brush

Dust box

Brush rotor

Hole

Gear

With the brush surface
facing upward, attach the
brush rotor.

Toothbrush

Auto Self Clean Unit



Clean the auto self clean unit frequently.

EP-L110E_EN.indd 38

2/7/2018 10:55:08 AM

Summary of Contents for EP-L110E





















































Search results

Summary of Contents for EP-L110E

Reviews:

Brands by name

Popular brands

Hitachi EP-L110E, Instruction Manual

Search results

Summary of Contents for EP-L110E

Reviews:

Brands by name

Popular brands