5 - 1
5-1 Items to Be Checked
(1) Checking Disc
Connect the AC adapter/charger or battery to the
camcorder, and set the power switch to “OFF”. Then
press the DISC EJECT button and make sure that
no disc is loaded. After checking, close the disc inser-
tion block.
If the disc insertion block does not open using the
above procedure, perform the following procedure:
1) Open the Shoe cover (a) in the direction of the ar-
row.
2) Insert a
fi
ne-tipped
fl
at-bladed screwdriver (d) into
the groove in EJ cover, and remove the EJ cover (b)
from Top cover in the direction of the arrow.
3) Use a
fi
ne-tipped
fl
at-bladed screwdriver, etc. to
move the lock slider (c) in the direction of the ar-
row to open the disc insertion block.
After checking, close the disc insertion block.
(2) Checking Card
Make sure that no card is loaded in the card slot,
and then, close the card slot cover.
Disassembly and Reassembly
5
Note:
Even if the shapes of parts are different, the following disassembly procedure, using the
DZ-BD7HA, is the same for all models.
Fig. 5-1-1 How to open the disc insertion block
Caution
Laser light striking the eye may cause your eyesight to be lost: For safety, be sure to remove any power
supply (AC adapter/charger, battery, etc.) from the camcorder before starting work.
A
B
C
D
(a) Shoe cover
(b) EJ cover
(c) Lock slider
(d) Fine-tipped fl at-bladed screwdriver
