4 - 9
Troubleshooting > Messages and Troubleshooting
Message
Cause/condition for
message to appear
Troubleshooting
No disc
Appears if no BD/DVD is loaded.
Load a BD/DVD
Appears when a disc that cannot be used
on the camcorder has been loaded.
Check the type of BD/DVD, and load
a BD/DVD that can be used on this
camcorder.
Appears when the BD/DVD was not
properly attached to the turntable.
Attach the BD/DVD properly.
If any of the above does not apply, the
camcorder may be faulty.
Refer to “4-5 Trouble Diagnosis ”.
No more scenes.
Play List was deleted.
Appears during user operation; all
recorded scenes have been deleted and
cleared. The speci
fi
cations stipulate that
a play list with no scene on it cannot be
held: If all registered scenes have been
deleted, the play list will also be deleted.
Operate the camcorder after the mes-
sage disappears.
Play Lists over limit.
Cannot create Playlist.
Appears if an attempt is made to create
a new play list or edit play list after
the number of registered play lists
has reached the upper limit (99) that
is de
fi
ned by the DVD video recording
format.
Delete unnecessary scenes before
creating a new play list or editing
play list.
Same scenes on Play List
will be deleted.
Delete scenes?
YES NO
This message appears during user
operation, if even one play list has been
created during scene deletion. This mes-
sage does not appear when a scene is
deleted from play list.
Choose “YES” and designate it to
delete selected scenes.
Scene is too short.
Cannot divide.
Appears if an attempt is made to divide
an very short scene. If division of scenes
is repeated, an extremely short scene
may be generated.
Give up the division of scene.
Scene NO.xxx is too large.
Please divide this scene
before dubbing.
Appears if the capacity of the corre-
sponding scene is greater than that of
one BD (approx. 7.5 GB)/DVD (approx.
1.4 GB).
Divide the scene so that the capacity
is less than that of one BD (approx.
7.5 GB)/DVD (approx. 1.4 GB).
Scenes over limit.
Cannot add scene.
Appears if an attempt was made to add
a new scene to the playlist in which
the number of registrable scenes had
reached the limit. [Refer to *1 page 4-11]
Delete unnecessary scenes from play
list before adding a new scene to it.
Scenes over limit.
Cannot divide scene.
Appears if an attempt was made to di-
vide a scene when the number of scenes
had reached the limit, of if dividing the
scene caused the number of scenes to ex-
ceed the limit. [Refer to *1 on page 4-11.]
Delete unnecessary scenes before
dividing a scene.
Stop processing.
This message appears during operation
process. It will appear when user
interrupted any process by pressing
the stop/exit button when processing
multiple scenes, etc.
Operate the camcorder after the mes-
sage disappears.
