4 - 19
Troubleshooting > Checking Versions of Firmware and Updating
5) After approx. 20 seconds, the updating start screen (Fig. 4-4-2) will appear, and the
fi
rmware
programs will be automatically updated thereafter. During updating, screens showing that desig-
nated
fi
rmware program is being updated will appear, followed by screen showing that updating
is complete.
Not all
fi
rmware programs need updating every time: If the version of the data on DVD-RAM/SD
memory card for updating is identical to that of
fi
rmware stored in camcorder, the same version
screen will appear.
6) When all required updating is complete, the screen for verifying the version of updated
fi
rmware
will appear, and the updated
fi
rmware will be displayed in red.
Make sure that the
fi
rmware has been updated to agree with the details speci
fi
ed by the technical
bulletin, etc.
7) To complete updating, set the power switch to “OFF”, and then remove the DVD-RAM/SD memory
card for updating.
Fig. 4-4-2 Example of Display on Updating Firmware
$:"$(!
4URNOFFPOWER
)0,XXXX?XXXXX+%2.%,XXXX?XXXX
!00,)XXXXXXXX'5)XXX?XXX
$2)6%-AIN XXXXXXXX2%6
$2)6%#ORE XXXXXXXX2%6
#!-%2!XXXX%%02/-XX
($$XXXXXXX
$ONOTTURNOFFPOWER
&IRMWAREUPDATE
SECONDS
$ONOTTURNOFFPOWER
&IRMWAREUPDATE
SECONDS
