Hitachi CE50-10, Instruction Manual

Page: 67 / 194

5.9 Changing the operation to be performed in the case
of a disk fault
If a disk fault occurs during the operation of the unit or if a slowdown in the disk access time is detected, a kernel
panic occurs by default. If you want to change this setting so that operation of the unit continues after a disk fault or a
slowdown detection, you need to change the definition file settings.
Definition files
• Definition file for disk faults: /
hitachi/etc/dskptrl_stop.conf
• Definition file for slowdown detection:
/hitachi/etc/slowdown_stop.conf
Item specified in a definition file
stop definition-value --- (A)
(A)
Specify 0 or 1 . The default is 0 . To change the operation, change the setting to 1 .
Table 5‒6: Definition values of the stop item
Definition value Description
0
A kernel panic (default setting) occurs.
1 Unit operation continues.
5. Configuring Software Environment
51