Hitachi CE50-10, Instruction Manual

Page: 166 / 194

### Started a compression of system information. ###
### Successfully completed.(20150801181021-eclog.tgz) ##
$
5. Use the
ls
command to check the size of the maintenance information file.
$ ls /tmp
-rw-r--r-- 1 0 0 873 Aug 1 18:10 20150801181021-eclog.list
-rw-r--r-- 1 0 0 115753706 Aug 1 18:10 20150801181021-eclog.tgz
6. Log out.
Log out from the target unit.
$ exit
7. Use the
scp
command to transfer the file to the maintenance PC.
Log in by using any user ID.
The following shows an example of when the target unit is
192.168.11.1.
For the file name, enter the file
name displayed in step 4 (enter the bold underlined parts ).
$ scp user-name @192.168.11.1:/tmp/ 20150801181021-eclog.* .
Password: password
8. Check the size of the transferred file.
Confirm that the size of the file saved in the maintenance PC is the same as the file at the acquisition source
(check the
bold underlined parts ).
If the maintenance PC is Linux:
$ ls -l 20150801181021-eclog.list
-rw-r--r-- 1 root root 873 Aug 1 18:10 20150801181021-eclog.list
$ ls -l 20150801181021-eclog.tgz
-rw-r--r-- 1 root root 115753706 Aug 1 18:10 20150801181021-eclog.tgz
If the maintenance PC is Windows:
> dir
directory-under-W:\Users\hoge\eclogsave_dir
2015/08/01 18:10 873 20150801181021-eclog.list
2015/08/01 18:10 115,753,706 20150801181021-eclog.tgz
8.2.3 Collecting maintenance information in configuration No. 3
Save maintenance information in external media connected to the unit. Before you start this operation, perform the
following:
• Disconnect the unit from the external system.
• Create partitions in the external media, and then format them with EXT4.
The backup data save area in the external media must be formatted with EXT4.
• Change the OS operation mode to maintenance mode.
8. Troubleshooting
150