Hitachi Koki DDC 52N, User Manual

Page: 75 / 209

3-37
6. Selecting the Original Copy Type
Chapter 3
Mak
in
g
C
o
pies
key for the original:
When you’re going to make copies using 1 2 or
2 1, first check to see if your original has a file
margin in it. The copier can correct the margin
position to make good copies as long as you
instruct it properly.
Touch .
Select the desired margin position.
You have a choice of the following two
Margin Positions.
Hold down the or key until the
desired margin width is reached.
Useful Tip
You can change the margin width in 1mm
increments within the range 0
∼
20mm.
Touch .
Useful Tips
• If the margin position is set to Left and width
to 0 mm, the image on both the front and back
sides of the copy has the same orientation as
that on the original.
• If the margin position is set to Top and width
to 0 mm, the image on the 2nd side of the copy
is inverted to that on the 1st side.
It’s not necessary to correct the margin position
and width if your original has no file margin.
If your original has a file margin
Margin
▼
▼
Original with a
File Margin Original with no
File Margin
1155O735AA
1
Margin
1155O283CB
2
1155O635AA
• Margin Position (Left)
• Margin Position (Top)
1155O636AA
If your original has no file margin
3
1155O285DB
4
Enter
1155O045AA
1155O046AA
▼