![Hitachi Koki DDC 52N User Manual Download Page 147](http://html.mh-extra.com/html/hitachi-koki/ddc-52n/ddc-52n_user-manual_2139579147.webp)
4-15
5. User’s Choice
Chapter
4
Us
ing
the Util
ity Mo
d
e
Useful Tips
• When “100 Accounts” is selected, the User’s
Choice functions of
to
can be
set for each account after the corresponding
access code has been entered. Note, however,
that when “100 Accounts” is selected, the
listing of User’s Choice displayed on the
Touch Panel is from
to
.
• The administrator can make the User’s
Choice settings in common with all 100
accounts after “100 Accounts” has been
selected.
➀
With the Touch Panel prompting you to
enter the access code, press the
key.
➁
Touch
.
➂
Enter the administrator number from the
10-Key Pad.
* This allows the administrator to make the
settings for
to
.
NOTE
The User’s Choice settings in common with 100
accounts for
to
are not valid for
the accounts for which the individual User’s
Choice settings have been made after “100
Accounts” was selected.
Specify the original
copy type automatically
selected when power is turned ON or panel reset.
The initial setting is 1-Sided
2-Sided.
Consult your Technical Representative if you want
to change the setting to 1-Sided
1-Sided.
Select the language of the Touch Panel messages.
The initial setting is “English.”
Select whether to default to Mixed Original
Detection (“ON”) or not (“OFF”) when power is
turned ON or panel reset.
The initial setting is “OFF.”
* If the following combination is set at a time in
User’s Choice, the Mixed Orig. Detect will be
automatically canceled and the copies are
made in 1
2 copy mode.
- Original
Copy Default:1-sided
2-sided
- Mixed Orig. Detect:
ON
Select whether to enable (“ON”) the function that
allows you to use the same image data of the copy
cycle that has just been completed or not (“OFF”).
The initial setting is “OFF.”
Specify the default mode selected automatically
when power is turned ON or panel reset, either
“Auto Paper,” “Auto Size,” or “Manual.”
The initial setting is “Auto Paper.”
Specify the default paper source that is
automatically selected.
The initial setting is “1” (1st Drawer).
1/6
4/6
1/4
4/4
Utility
User’s Choice
1/6
6/6
1/6
4/6
1/6
Original
Copy Default
Language Selected
Mixed Original Detect
Memory Recall
Auto Paper/Auto Size
Tray Priority
▼
▼
▼
▼
▼
▼
▼
Summary of Contents for DDC 52N
