manualshive.com logo in svg

Hioki BT3554, Instruction Manual, Page: 71 / 130

Share
Download
Hioki BT3554 Instruction Manual Download Page 71

63

Setting the Comparator Buzzer

4.4  Setting the Comparator Buzzer

The buzzer can be enabled in accordance with comparison results 
when the comparator function is used. The buzzer can be set to 

VRXQGLQWKHIROORZLQJVWDWHV%\GHIDXOWWKHEX]]HULVFRQ¿JXUHGWR

sound when the comparison result is WARNING or FAIL. 
In addition to the buzzer, when the comparison result is WARNING 
or FAIL, the backlight is turned on red.

OFF

The buzzer will not sound regardless of comparison results.

PASS (ON)

The buzzer sounds when comparison results are PASS.

FAIL (ON)

The red backlight turns on, along with the buzzer sounds 
when comparison results are WARNING or FAIL.

When you press the 

 key, the present comparator buzzer 

setting is displayed. Press the key repeatedly to cycle through the 
settings.

OFF

PASS

FAIL

When there is no activity for approximately 1 second, the settings 

RQWKHGLVSOD\ZLOOEHFRQ¿UPHGDQGUHWXUQVWRWKHPHDVXUHPHQW

screen.

The key tone settings cannot be changed.

1

2

3

4

5

6

7

Appx.

Index

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for BT3554



































































































































Reviews:

No comments