46
Adjusting Zero Value (Zero Adjustment)
Zero Adjustment Troubleshooting
Check items
Solution
Is the fuse burned out?
If so, replace it with a new fuse. (p. 109)
Do the correction
values obtained exceed
300 counts in either
resistance or voltage
range?
Ensure that the test lead is properly connected
to the instrument.
The test lead may be disconnected. If so,
replace it with a new one.
7U\FOHDQLQJWKH]HURDGMXVWPHQWERDUG
Did you short the test
leads properly while the
instrument is in standby
for correction values?
While the instrument is in standby for correction
values (for approximately 10 seconds), short
WKHWHVWOHDGVXVLQJWKH]HURDGMXVWPHQWERDUG
WRSHUIRUP]HURDGMXVWPHQW
Canceling the Zero Adjustment Operation
Pressing the
0ADJ
NH\IRUDWOHDVWVHFRQGVZKLOHWKH]HUR
DGMXVWPHQWIXQFWLRQLVDFWLYHFDQFHOVWKH]HURDGMXVWPHQWRSHUDWLRQ
Zero adjustment: ON
Zero adjustment: OFF
Press for
at least 2
seconds.
www.
GlobalTestSupply
.com
Find Quality Products Online at: