manualshive.com logo in svg

Hioki BT3554, Instruction Manual, Page: 108 / 130

Share
Download
Hioki BT3554 Instruction Manual Download Page 108

101

)XQFWLRQDO6SHFL¿FDWLRQV

(13) Self Test function

LCD

All screen elements are displayed (power-on option).

ROM

Accessed and checked when the power is turned on.

Other 
capabilities

A/D converter, detection of hardware failure

(14) System Reset

Functionality

The function restores all the settings, excluding the 
comparator setup table and stored data, to factory defaults.

How to reset

Power-on option
1. Turn on the power while pressing the 

CLEAR

 key to 

navigate to the system reset screen.
2. Select 

>\(6@

 or 

>QR@

 and press the 

ENTER

 key to reset 

the system.

(15) USB Communication function

The function handles the commands to communicate with computers.
When the USB is connected to the computer while the Bluetooth

®

 

Communication function is on, the Bluetooth

®

 Communication function is 

turned off automatically. (only for BT3554-01).

(16) Bluetooth

®

 Communication function (Only for 

BT3554-01)

The function enables you to transfer data to a smart phone or a tablet, and 
view measurement values.

1

2

3

4

5

6

7

8

Index

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for BT3554



































































































































Reviews:

No comments