manualshive.com logo in svg

Hioki BT3554, Instruction Manual, Page: 113 / 130

Share
Download
Hioki BT3554 Instruction Manual Download Page 113

106

Troubleshooting

Error

Cause

Solution

The comparison 
result of the 
comparator is not 
correct.

The comparator 
threshold values are not 
set correctly.

Set the correct threshold 
values. (p. 57)

Temperature is 
not displayed on 
the screen when 
the model 9460 
Clip Type Lead 
with Temperature 
Sensor is used.

The model 9460 
Clip Type Lead with 
Temperature Sensor is 
not connected correctly.

Connect it correctly. 
(p. 53)

Incorrect 
measurement 
values are 
obtained.

or

[

íííí

]

 is 

displayed on the 
screen.

or

Both 

[OVER]

 and 

the maximum 
display values 

ÀDVKHV

The test lead is not 
connected correctly.

Connect the test lead 
correctly. (p. 33)

The test lead is 
disconnected.

Replace with a new test 
lead.

The fuse is burned out.

Replace with a new fuse. 
(p. 109)

Zero adjustment is not 
performed correctly.

Perform zero adjustment 
correctly. (p. 40)

An appropriate range is 
not selected.

Select the appropriate 
range using the range key. 
(p. 39)

The date and time 
are completely 
wrong when the 
instrument is 
switched on.

The built-in backup 
lithium battery of the 
instrument needs 
replacement.

The user cannot replace 
the battery. Contact your 
authorized Hioki distributor 
or reseller.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for BT3554



































































































































Reviews:

No comments