manualshive.com logo in svg

Hioki BT3554, Instruction Manual, Page: 17 / 130

Share
Download
Hioki BT3554 Instruction Manual Download Page 17

8

Safety Information

Notation

In this document, the risk seriousness and the hazard levels are 

FODVVL¿HGDVIROORZV

DANGER

Indicates an imminently hazardous situation that 
will result in death or serious injury to the operator.

WARNING

Indicates a potentially hazardous situation that may 
result in death or serious injury to the operator.

CAUTION

Indicates a potentially hazardous situation that may 
result in minor or moderate injury to the operator or 
damage to the instrument or malfunction.

IMPORTANT

Indicates information related to the operation of the 
instrument or maintenance tasks with which the 
operators must be fully familiar.

Indicates a high voltage hazard. 
If a particular safety check is not performed or the 
instrument is mishandled, this may give rise to a 
hazardous situation; the operator may receive an 
electric shock, may get burnt or may even be fatally 
injured.

Indicates prohibited actions.

Indicates the action which must be performed.

HOLD

Indicates a control key.

[HOLD]

Indicates the display on the screen.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for BT3554



































































































































Reviews:

No comments