User Manual of Network Video Recorder - User Manual
31
Figure 2. 14
IP Camera Management Interface
Table 2. 2
Explanation of the icons
Icon
Explanation
Icon
Explanation
Edit basic parameters of the camera
Add the detected IP camera.
The camera is connected; you can
click the icon to get the live view of
the camera.
The camera is disconnected; you can
click the icon to get the exception
information of camera.
Delete the IP camera
Advanced settings of the camera.
3.
(For the encoders with multiple channels only) check the checkbox of Channel No. in the pop-up window and
click
OK
to finish adding.
2.3.2
Editing the Connected IP Cameras and Configuring
Customized Protocols
After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the
basic setting of the IP cameras.
Steps:
1.
Click the
icon to edit the parameters; you can edit the IP address, protocol and other parameters.
